+86 135 6618 2597      sales@chinawanhe.com
You are here: Home » News » Industry news » Correct use of powder packaging machine

Correct use of powder packaging machine

Views: 88     Author: Site Editor     Publish Time: 2022-01-06      Origin: Site

With the rapid development of the food industry, food packaging has also ushered in rapid development. The extensive use of powder packaging machines not only improves packaging efficiency, increases the level of packaging industrialization, and ensures packaging quality. At the same time, it has a great effect on improving workers' working conditions and saving labor costs. Of course, customers need to use the equipment reasonably after purchasing the equipment to ensure the normal operation of the equipment and the life of the equipment. So, how to use the powder packaging machine?


For customers, in the process of using the equipment, reasonable operation is required to reduce the occurrence of failures and ensure the stable operation of the powder packaging machine facilities.

Any packaging equipment has standardized operating requirements. If you do not operate the equipment scientifically and do not pay attention to related matters, even if there is no equipment failure in a short time, it will increase the failure rate of the equipment. So, how to install and operate the powder packaging machine reasonably to ensure the smooth operation of the equipment?

The actual operation of the powder packaging machine needs to pay attention to these aspects.

1.Insert the cord plug of the machine into the AC power socket, turn on the main circuit of the machine, and connect to the circuit of the whole machine.

2.Install the bakelite mold on the mold table, and connect the wires on the bakelite mold to the bakelite mold terminal in the middle of the machine mold table.

3.Turn on the cooling switch, connect to the cooling time zone control circuit, adjust the button when setting the cooling time zone, and select the pressure plate cold pressing time zone.

4.Customers can choose the appropriate heating current gear according to the specific packaging situation.

In the whole process of packaging and processing, the parts of the sealing and cutting film are of high temperature, so the operator should not touch the heating sealing wheel, sealing mold and moving components at will to avoid scalding. In addition, it is strictly forbidden to extend your hair, gloves and clothes into the moving parts of the packaging machine to avoid being involved and causing accidents. Customers also need to inspect, clean and lubricate each packaging machine on time. There is also a need to do a good job of heat dissipation and ventilation. The packaging equipment should not be used in a high temperature, damp, cold, or dirty environment. Not only can it avoid rapid damage to components and product pollution, but also prevent the performance of the facility from being affected. Affect the follow-up work efficiency of the facility and its service life.

Tell us about your project and we will find the best solution to start it !
  Ruian City,Wenzhou City, Zhejiang Province
   +86 135 6618 2597
 +86-577-65878982 65878983

Leave a Message

Copyright © 2021 Wenzhou Wanhe Machinery Co., Ltd. All rights reserved.