Views: 85 Author: Site Editor Publish Time: 2022-01-27 Origin: Site
In order to meet the continuous demand of the market, the distribution of packaging machinery types is more rational and meticulous. Among them, the types and scope of use of powder packaging machines occupy a very important market share in the market. Therefore, how to use the powder packaging machine correctly and reasonably directly affects the development of the enterprise. Therefore, the maintenance and maintenance of the powder packaging machine is the key to ensure the normal operation of the machine, and it is also an important condition for the normal development of the enterprise. In view of the special functions of the powder packaging machine in the industry, the maintenance and maintenance of the equipment also needs to be extra cautious.
First, the lubrication of the equipment:
1. Regularly add oil lubrication to the meshing parts of the gears of the automatic powder packaging machine, the oil filling hole of the bearing with a seat and each moving part, once per shift.
2. It is strictly forbidden to run the reducer without oil. After the first 300 hours of operation, clean the interior and replace with new oil, and then change the oil every 2500 hours of operation.
3. When adding lubricating oil, please be careful not to drip oil on the drive belt to prevent slippage and loss or premature aging of the belt.
Second, is the cleaning of the equipment:
1. The metering department should be cleaned in time after shutdown. For the packaged materials with high sugar content such as granules, it should be ensured that the turntable and the unloading door are cleaned every shift.
2. Always clean the heat sealer body to ensure that the sealing lines of the finished bag are clear.
3. For scattered materials, it should be cleaned up in time to keep the parts clean, so as to prolong the service life.
4. Always clean the light-emitting head of the photoelectric switch (electric eye) to ensure its reliable operation.
5. Always clean the dust in the electric control box to prevent electrical faults such as short circuit or poor contact.
Finally, there is the maintenance of the equipment:
1. Always check the screws of each part of the powder automatic packaging machine, and there must be no looseness.
2. The electrical department should pay attention to waterproof, moisture-proof, anti-corrosion, and rat-proof. Ensure that the inside of the electric control box and the terminals are clean to prevent electrical failures.
3. When shutting down, the two heat sealer bodies should be in the open position to prevent the packaging materials from being scalded.
Correct maintenance and maintenance of the powder packaging machine can not only make us more convenient in the use process, but also will not make mistakes during use, so as not to bring us unnecessary losses. Maintenance and maintenance are conducive to improving the packaging efficiency, improving the quality of the packaged products, and at the same time extending the life of the powder packaging machine. Therefore, it is necessary to use the correct method to maintain and maintain the powder packaging machine.